MAGENE's eBike System: One-stop solution, only for a better riding experience

MAGENE has always been committed to developing intelligent, interesting, and information-based cycling equipment, and has achieved marked results in professional cycling. Meanwhile, MAGENE stays committed to prioritizing user needs, while hoping to provide some different solutions for power assistance with the help of its experience in professional cycling. So, MAGENE independently developed a new solution for eBike systems.

MAGENE eBike system is composed of App, display, controller, torque sensor, electronic shifting, and radar sensor. All the components are fully adapted and connected and can be displayed and set via the app. All upgrades, updates, and maintenance of software and hardware products can be completed via the app so that your eBike can maintain the best riding status at any time.

I. Core Components

 Controller

The MAGENE controller adopts a centralized outlet design and is equipped with waterproof cables as a standard for avoiding damage from water. Compared with the waterproof connectors with a diameter of 8 mm to 10 mm on the market, the 6 mm-diameter connector of MAGENE is smaller and easier to plug in and out and 35.5 mm-length cables are much easier to hide in the bike frame. Moreover, the MAGENE controller adopts the self-developed automatic assist and smooth assist algorithm, which ensures a smoother riding experience.

CR31 controller

250W - 350W compatible, small size, easy to hide ;

CR71 controller

500W - 750W compatible, 80*48.8*38.5mm, fit in thinner bike downtube;

CR70 controller

500W-750W rated power, whole aluminum alloy base, heat dissipation improved by 30% with lifespan 30% longer.

Display

MAGENE DY series covers a variety of products with different configurations and functions which are all built in Bluetooth module to connect APP to get more rich data and settings.

DY21 LCD segment screen display

With a built-in Bluetooth module, the display can be connected to APP to display more data, dual power switch and display, shifting control and others. 

DY12 LED Display

Ergonomic-design buttons. Buttons are located under the handlebar, which features more comfortable touching. 

Mirroring-design installation. The display can be installed on the left and right sides of the handlebar and can be used separately and simultaneously. 

Built-in light sensor module. It can intelligently control the LED brightness and the headlight brightness of eBikes;

DY11 LED Display

With a minimalist design of three buttons, it can be connected to a mobile APP, providing richer interaction and functions.

SR20 hollow bottom bracket & integrated digital bilateral torque sensor

The SR20 adopts digital signal transmission featuring low loss and fast speed and can ensure a signal delay of ≤ 10 ms and ±2% accuracy compared with a delay of ≥ 20 ms and 5%-8% accuracy which uses analog signal transmission. Additionally, the integrated sensor is more time-saving and effort-saving than the solution of a square-hole bottom bracket, which can save 50% of man-hours.

In order to ensure the reliable performance of the product, the salt spray test of the SR20 bottom bracket can meet 168 hours, and also successfully passed the 1800N fatigue test of 150,000 times, far exceeding the industry test standard of 100,000 times.

II. Extension Components

ED20 Electronic Shifting

Unlike the traditional eBike system that uses mechanical finger shifting, MAGENE includes electronic shifting for the first time. The ED20 small-volume wire actuator solution can realize gear shifting via buttons, which can effectively reduce finger fatigue or pain and is more accurate. Moreover, the handlebar is more concise by removing the mechanical shifting. The product is small in size, easier to install and hide, and the cycling experience can be upgraded without any bike modification.

Perfect integration -ED20 can be integrated into eBike systems through wired connection and powered by the eBike battery, to improve the use experience of the whole system.

Easy installation - the ED20 is small, easy to install, and can also be hidden in the bike frame;

Better cost performance - the ED20 pull actuator can reduce the cost by 80% compared to the electric rear derailleur

Auto Shift 1.0

Through the self-developed algorithm system, combined with the display, SR20 and ED20, the system will automatically switch to the appropriate flywheel according to the changes of the riding environment, such as the change of road surface, the increase/decrease of slope, the change of wind resistance, bike starting/stopping, etc., so that the rider can enjoy the ride in different scenes without manual operation.

Pay no attention to gear shifting, more focused on the riding experience;

Reducing the distraction of shifting and safer riding in special scenes

Auto Shift + Auto Assist will make your eBike an Auto-Bike.

RL51 Radar Sensor

To pursue safer riding, MAGENE has included the RL51 small-size radar sensor, which can help detect the speed and distance of approaching vehicles within 140 m behind in real-time. Working with displays the vehicles behind can be observed without looking back. The product is small in size and can be directly installed on the rear end of the seat.

Work with the display

Observe the vehicles behind without looking back.

Integrated into eBike systems

More stable performance through wired connection to access the system and powered by the eBike battery.

III. APP

All the components in the MAGENE eBike system are fully adapted and connected and can be displayed and set via the app. Currently, MAGENE has planned different software for users and customization parties.

eBike Connect 

Via eBike Connect APP, users can set up the display buttons, adjust the value of the assist level, set automatic assist, smooth assist, and set up other functions, creating an exclusive vehicle that suits the rider's own needs.

eBike Factory

eBike Factory is developed for manufacturers. Through the App, Magene standard controller and other components can be set up and adjusted according the clients’ demand. The app can be used for storing configuration files in the cloud. It supports direct cloud importing during mass production, thereby simplifying the production process and improving production efficiency.

In addition to the above product series, Magene is also developing a number of controllers, displays and other products, Magene after-sales management system is also being built to provide more accurate system fault detection. 

MAGENE applies their successful experience in indoor and outdoor professional cycling such as trainers, power meters, bike computers, and radar taillights to eBike system research and development. Cooperating with MAGENE's self-developed intelligent assist algorithm and engineers' on-site one-to-one model adjustment, the riding experience of each model is different, which is more tailored to the riding experience of different users among different scenes, hence a better riding experience is obtained.